(866) 416 1660
|
Contact Us

Boom Truck Safety (CAN)

This 90-minute OSHA-compliant aerial lift training covers safe boom and scissor lift operation, stability, inspections, and hazard prevention.

Boom Truck Safety (CAN)

What is Boom Truck Safety (CAN)?

Mobile Crane Safety Training (CSA) provides online instruction for operators, riggers, and supervisors to safely operate, inspect, and rig mobile cranes across construction, mining, logging, manufacturing, and transportation industries. This course covers crane anatomy, daily inspections, load chart interpretation, stability control, rigging techniques, hazard prevention, and communication procedures using standard hand signals. Participants gain practical knowledge to protect workers, prevent accidents, and ensure compliance with CSA Z150-1998, with a Certificate of Completion available for immediate download upon finishing the training.

Course Overview

Cranes are essential to modern industry, powering productivity across construction, mining, logging, manufacturing, and transportation. This Mobile Crane Safety online course provides a comprehensive overview of safe crane operation, setup, inspection, and communication practices.

Designed to meet CSA Standard Z150-1998, this training helps operators, riggers, and supervisors understand the mechanics and hazards of mobile crane use. Learners will explore crane stability, load charts, rigging principles, and hazard prevention techniques that protect workers and equipment on the job site.

By the end of this course, participants will be able to:

  • Identify the anatomy and components of a mobile crane
  • Perform daily inspections and recognize mechanical or operational defects
  • Interpret load charts and understand factors affecting crane stability
  • Apply safe setup and rigging practices for lifts of all sizes
  • Use correct communication methods, including standard hand signals
  • Recognize and control the six most common hazards in crane operation

Course Topics

  • Anatomy of the Crane
  • The Importance of Daily Inspections
  • Crane Stability and Load Charts
  • Safety Considerations of Crane Setup
  • Communication and Hand Signals
  • Basic Rigging Principles
  • Safe Inspection and Use of Lifting Slings
  • “Critical Lifts” and Planning Requirements
  • Common Hazards in Crane Operation

Course Duration

Approximately 90 minutes. Learners may pause and resume training at any time.

Pass Mark

An 80% score is required to pass. Participants may attempt the course up to three times. Knowledge checks throughout reinforce understanding and retention.

Certificate of Completion

Upon successful completion, a Certificate of Completion will be available immediately for download and printing.

Boom Truck Safety (CAN)

Get Certified Today!

$99.99

Course Preview

$99.99

Duration

Average Completion Time

Approximately 90 minutes. Learners can pause and resume training at any time.

Testing

Knowledge Assessment

An 80 % score is required to pass. Participants may attempt the course up to three times. Knowledge checks throughout reinforce understanding and retention.

Certificate

Certificate of Completion

Upon successful completion, a Certificate of Completion will be available immediately for download and printing.

Get Your Recognized Leadership for Safety Excellence Certificate Today!

Get your Weights and Dimensions Certificate in as little as 90 minutes!

Get Certified Today!

Related Courses

Dairy Workers: Feed Handling and Storage Safety
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Biosafety Hazardous Waste Handling and Disposal (US)
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Bear Awareness (OSHA)
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Asphalt Safety (OSHA)
Aerial Lifts in Industrial and Construction Environments: Types of Lifts and Their Hazards
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Bloodborne Pathogens in Healthcare Facilities
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Biosafety Cabinets
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Building a Lasting Culture of Safety
Lockout Tagout (LOTO) Online Training Course
Conflict Resolution in the Office
Arsenic Awareness (US)
PowerSafe: Comprehensive Electrical Hazard Awareness Training Package
https://courses.trainanddevelop.ca/store/bis-safety-software-store/productdetails/alberta-provincial-hours-of-service-school-bus-and-passenger-bus-van