Coupling and Uncoupling: Driver Training Series

What is Coupling and Uncoupling: Driver Training Series?

The Coupling & Uncoupling online training course equips drivers with the knowledge and techniques needed to handle tractor-trailer connections safely and effectively. Participants learn how to inspect the fifth wheel, align the tractor, secure connections, and operate landing gear correctly. The course emphasizes consistent, safe procedures that prevent equipment damage and reduce the risk of injury, helping both new and experienced drivers build confidence when coupling and uncoupling trailers.

Course Overview

The Coupling & Uncoupling online training course teaches drivers how to perform safe, correct, and consistent coupling and uncoupling procedures. Whether you’re new to commercial driving or have years of experience behind the wheel, understanding how to inspect the coupling system, make a secure fifth-wheel connection, and safely disconnect a trailer is essential for preventing injuries and equipment damage.

This course explains what to look for during a thorough pre-trip inspection, how to position the tractor for a solid connection, and the correct method for operating landing gear and pull releases. The training is designed to build confidence and reinforce the safe habits needed to work with tractor-trailer combinations.

TOPIC OVERVIEW

Coupling and uncoupling errors can lead to dropped trailers, jackknifes, equipment damage, and serious safety risks. This course provides the foundational knowledge drivers need to avoid these hazards by following the right steps and recognizing potential issues before they become problems.

COURSE TOPICS

Inspecting the Fifth Wheel

Components to check
Signs of wear or mechanical issues
Proper alignment and preparation

Getting Into Position

Tractor alignment
Height and angle considerations
Approaching the trailer safely

Connecting

Backing and locking procedures
Verifying a secure connection
Checking gladhands and electrical lines

Completing the Disconnect

Safe uncoupling steps
Landing gear operation
Fifth-wheel pull release procedures

COURSE DURATION

Approximately 20 minutes.

PASS MARK

A score of 80% is required to pass. Learners may take the course up to three times.

CERTIFICATE OF COMPLETION

A downloadable and printable certificate is available upon successful completion.

Coupling and Uncoupling: Driver Training Series

Get Certified Today!

Course Preview

Duration

Average Completion Time

Approximately 20 minutes.

Testing

Knowledge Assessment

A score of 80% is required to pass. Learners may take the course up to three times.

Certificate

Certificate of Completion

A downloadable and printable certificate is available upon successful completion.

Get Your Recognized Leadership for Safety Excellence Certificate Today!

Get your Weights and Dimensions Certificate in as little as 90 minutes!

Get Certified Today!

Related Courses

Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."

Biosafety Hazardous Waste Handling and Disposal (US)

Asphalt Paver (CAN)

Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."

Biological Hazards (OSHA)

Aerial Lifts in Construction Environments

Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."

Boom Lift – Operator Safety (OSHA)

Cranes and Derricks for Construction

Creating Brave Spaces – Enhancing Psychological Safety in the Workplace

Concrete Truck – Operator Safety (CAN)

Applying Electrical Standards (US)

Confined Space Entry Supervisor

First Aid Fundamentals

Analyzing Biological Hazards