(866) 416 1660
|
Contact Us

Construction Safety Basics: Safe Use of Equipment

Learn about employee rights and employer obligations for jury duty, military, and family leave in this 20-minute online compliance training.

 

Construction Safety Basics: Safe Use of Equipment

What is Construction Safety Basics: Safe Use of Equipment?

Construction sites involve a wide range of tools, machinery, and elevated equipment, all of which carry inherent risks if not used properly. The Construction Equipment Safety Training course equips workers with the knowledge and skills needed to operate tools and equipment safely, follow proper procedures, and prevent accidents. From hand and power tools to lifts and lockout/tagout practices, this training ensures that workers understand how to identify hazards, maintain equipment, and protect themselves and their coworkers in a dynamic work environment.

Course Overview

The Construction Safety Basics: Safe Use of Equipment course provides a practical introduction to essential safe-work practices for construction sites. This training supports OSHA compliance by helping workers understand the hazards associated with tools, equipment, and elevated work platforms, as well as the safety procedures needed to reduce risk.

Learners begin with an overview of the risks tied to improper tool use, including common causes of injury and strategies to prevent them. The course then covers scaffold, aerial lift, and scissor lift safety—highlighting setup requirements, inspection practices, and proper operating procedures. Participants are also introduced to lockout/tagout methods to help prevent accidental equipment startup during servicing or maintenance.

By the end of the course, workers will know how to identify equipment hazards, use tools safely, and follow established procedures that keep themselves and their coworkers protected.

TOPIC OVERVIEW

Tool and equipment safety is a foundational part of construction work. Understanding how to operate tools correctly, maintain equipment, and recognize hazardous conditions helps workers reduce injuries and support a safer work environment.

COURSE TOPICS

Safe Use of Tools

  • Identify hazards associated with hand and power tools
  • Follow safe operating procedures
  • Understand proper tool inspection and maintenance

Elevated Work Platforms

  • Use scaffolds, aerial lifts, and scissor lifts safely
  • Recognize stability, fall, and electrical hazards
  • Apply safe-work practices for setup and operation

Lockout/Tagout Procedures

  • Understand when lockout/tagout applies
  • Learn how to isolate equipment safely
  • Follow steps to prevent accidental activation
COURSE DURATION

This online training takes approximately 20 minutes to complete. Learners can start, pause, and resume at their convenience.

PASS MARK

A minimum score of 80% is required to pass the final assessment. Learners have three attempts to achieve a passing grade.

CERTIFICATE OF COMPLETION

Upon successful completion, learners can download and print a digital certificate confirming their understanding of equipment safety practices for construction environments.

Construction Safety Basics: Safe Use of Equipment

Get Certified Today!

$59.99

Course Preview

$59.99

Duration

Average Completion Time

This online training takes approximately 20 minutes to complete. Learners can start, pause, and resume at their convenience.

Testing

Knowledge Assessment

A minimum score of 80% is required to pass the final assessment. Learners have three attempts to achieve a passing grade.

Certificate

Certificate of Completion

Upon successful completion, learners can download and print a digital certificate confirming their understanding of equipment safety practices for construction environments.

Get Your Recognized Leadership for Safety Excellence Certificate Today!

Get your Weights and Dimensions Certificate in as little as 90 minutes!

Get Certified Today!

Related Courses

Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Backing Techniques: Driver Training Series
Asbestos Awareness (OSHA)
Analyzing Hazards
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Benzene Safety
Concrete and Masonry
Asphalt Paver (CAN)
Confined Space Entry Awareness
Construction Safety Basics: Work Environment
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Behavior Based Safety (BBS)
Electrocution Hazards Part I Worksite Safety
Confined Spaces: Entry Team Training – Maintenance Activities
Defensive Driving: Extreme Winter Driving with Skid Control/Recovery