(866) 416 1660
|
Contact Us

Crane Operator Safety

Learn about employee rights and employer obligations for jury duty, military, and family leave in this 20-minute online compliance training.

 

Crane Operator Safety

What is Crane Operator Safety?

The Crane Operator Safety course equips learners with the essential knowledge and practices needed to operate cranes safely on construction and industrial sites. Participants learn how to prepare a worksite, position and operate cranes correctly, identify hazards, and respond effectively to changing conditions. This training emphasizes risk awareness, safe decision-making, and adherence to industry best practices, helping operators reduce the likelihood of incidents and maintain a secure work environment for themselves and those around them.

Course Overview

The Crane Operator Safety course provides a focused introduction to the essential practices operators need to follow to prevent incidents on the job. With more than 250,000 people operating cranes each day, consistent safe habits are critical—yet easy to overlook during routine work. This course reinforces the fundamentals of preparing a worksite, positioning and operating a crane correctly, recognizing risk conditions, and responding appropriately when hazards arise.

Learners explore real-world risks, review industry-accepted operating procedures, and refresh their understanding of how changing conditions can impact crane stability and performance. By the end of the training, operators will be better equipped to make safe decisions that reduce the likelihood of injury and maintain a controlled work environment.

TOPIC OVERVIEW

Cranes play a vital role in construction and industrial operations, but improper setup or unsafe practices can lead to serious incidents. Understanding how to prepare a site, operate equipment correctly, and evaluate environmental and load conditions is essential for anyone working with or around cranes. This course reinforces the awareness and decision-making skills needed to keep operations safe.

COURSE TOPICS

Worksite Preparation

  • Establishing a safe lifting area
  • Identifying hazards
  • Confirming ground conditions

Setup and Operation

  • Proper crane positioning
  • Safe lift planning
  • Communication and signaling

Special Operations

  • Handling unusual loads
  • Working near power lines
  • Operating under challenging conditions

Safety and Response

  • Preventing common incidents
  • Responding to unsafe situations
  • Emergency considerations

Conditions Affecting Operations

  • Weather effects
  • Soil stability
  • Equipment and load factors
COURSE DURATION

Approximately 20 minutes.

PASS MARK

A minimum score of 80% is required to pass. Learners may attempt the assessment up to three times. Short quizzes throughout the training reinforce key concepts.

CERTIFICATE OF COMPLETION

A digital certificate is available to download and print upon successful completion of the course.

Crane Operator Safety

Get Certified Today!

Buy Now $144.99

Course Preview

$144.99

Duration

Average Completion Time

Approximately 20 minutes.

Testing

Knowledge Assessment

A minimum score of 80% is required to pass. Learners may attempt the assessment up to three times. Short quizzes throughout the training reinforce key concepts.

Certificate

Certificate of Completion

A digital certificate is available to download and print upon successful completion of the course.

Get Your Recognized Leadership for Safety Excellence Certificate Today!

Get your Weights and Dimensions Certificate in as little as 90 minutes!

Get Certified Today!

Related Courses

Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Bear Awareness (OSHA)
Confined Space Hazards (US)
Infection Prevention and Control (IPAC): Basic Awareness Training
Amphibious Excavator (CAN)
Aerial Lifts in Industrial and Construction Environments: Types of Lifts and Their Hazards
Confined Space Competent Person (OSHA)
Concrete and Masonry Construction (OSHA)
Confined Space Competent Person (CAN)
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Autoclave Safety
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Boom Lift – Operator Safety (CAN)
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Boom Lift – Operator Safety (OSHA)
Dairy Workers: Milking and Chores Safety