(866) 416 1660
|
Contact Us

Crane Safety for General Industry

Learn about employee rights and employer obligations for jury duty, military, and family leave in this 20-minute online compliance training.

 

Crane Safety for General Industry

What is Crane Safety for General Industry?

The Crane Safety for General Industry course provides essential knowledge on recognizing hazards, performing inspections, and following safe operating practices when working with or around cranes. Participants learn about different crane types, key components, and the best methods to protect themselves and their coworkers during lifting operations. This course equips learners with practical skills and industry-aligned guidance to minimize risks, ensure safe crane operation, and maintain a secure work environment.

Course Overview

The Crane Safety for General Industry course introduces learners to the common hazards associated with cranes and the safe practices required when operating or working near them. Cranes are essential tools for lifting and moving heavy materials, but their safe use depends on proper training, routine inspections, and consistent attention to safe operating procedures.

This course provides a clear overview of the types of cranes used in general industry, how to identify jobsite risks, and what operators and nearby workers should do to protect themselves. Through practical examples and industry-aligned guidance, participants gain the knowledge needed to recognize hazards, carry out safe operating practices, and support a safer work environment.

TOPIC OVERVIEW

Cranes introduce unique risks—from mechanical failures to struck-by incidents—and understanding these hazards is a critical part of maintaining safety onsite. This course helps learners identify those risks and apply proven methods to minimize them.

COURSE TOPICS

Types of Equipment Covered by OSHA’s Subpart CC

  • Common crane types and their intended uses
  • Key components and operational differences

Safe Work Practices

  • Best practices for working on or near cranes
  • Protecting yourself and others during lifting operations

Equipment Inspection

  • Daily and periodic inspection requirements
  • Identifying signs of wear, malfunction, or improper setup

Hazard Assessment

  • Recognizing overhead, environmental, and load-related hazards
  • Evaluating jobsite conditions before and during operations

Crane Operations

  • Safe lifting procedures
  • Communication and signaling
  • Load handling fundamentals

And More

  • Additional safety considerations for general industry environments
COURSE DURATION

Approximately 30 minutes

PASS MARK

A score of 80% is required to pass. Learners may attempt the assessment up to two additional times. Knowledge checks throughout the course reinforce key points.

CERTIFICATE OF COMPLETION

A digital certificate is available to download and print upon successful completion of the course.

Crane Safety for General Industry

Get Certified Today!

Buy Now $59.99

Course Preview

$59.99

Duration

Average Completion Time

Approximately 30 minutes

Testing

Knowledge Assessment

A score of 80% is required to pass. Learners may attempt the assessment up to two additional times. Knowledge checks throughout the course reinforce key points.

Certificate

Certificate of Completion

A digital certificate is available to download and print upon successful completion of the course.

Get Your Recognized Leadership for Safety Excellence Certificate Today!

Get your Weights and Dimensions Certificate in as little as 90 minutes!

Get Certified Today!

Related Courses

CPR/AED/First Aid (OSHA)
Confined Space Entry (Alberta)
Construction Safety Basics: In Case of an Emergency
Crystalline Silica Awareness
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Building a Lasting Culture of Safety
Conflict Resolution in the Office
Concrete and Masonry
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Building Your Career
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Beryllium (CAN)
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Asphalt Safety (OSHA)
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
ATV/ UTV Safety
Confined Space Hazards for Canada