(866) 416 1660
|
Contact Us

Cranes and Derricks for Construction

Learn about employee rights and employer obligations for jury duty, military, and family leave in this 20-minute online compliance training.

 

Cranes and Derricks for Construction

What is Cranes and Derricks for Construction?

The Cranes and Derricks for Construction course provides essential knowledge for safely operating lifting equipment on construction sites. Participants learn about crane and derrick types, hazard recognition, equipment inspections, and OSHA Subpart CC requirements. The course emphasizes practical safety practices, planning, and compliance, giving workers and supervisors the tools to prevent incidents, protect themselves, and ensure every lift is performed safely.

Course Overview

The Cranes and Derricks for Construction course introduces learners to the equipment covered under OSHA’s Subpart CC and the safe practices required to prevent crane-related incidents. Cranes and derricks are essential tools on many jobsites, designed and tested for safe operation when used correctly. However, improper setup, poor planning, or unsafe practices can quickly lead to serious injuries or catastrophic failures.

This course highlights the importance of hazard recognition, equipment inspections, and safe operating procedures. Learners review common jobsite risks, how OSHA’s Subpart CC applies to construction work, and practical steps workers can take to protect themselves when working on or around lifting equipment. By the end of the training, participants will be better equipped to support safe crane operations through awareness, planning, and compliance with regulatory requirements.

TOPIC OVERVIEW

Construction sites often rely on cranes and derricks for lifting and material handling. Understanding the hazards associated with this equipment—and the controls required to manage them—is key to preventing accidents and ensuring every lift is performed safely.

COURSE TOPICS

OSHA Subpart CC Overview

  • Understanding the purpose and scope of Subpart CC
  • Equipment classification and regulatory expectations

Hazard Awareness

  • Identifying potential crane and derrick hazards
  • Environmental, mechanical, and operational risks

Equipment Inspection

  • Pre-operation checks
  • Recognizing unsafe conditions and equipment concerns

Hazard Assessment

  • Jobsite evaluation prior to crane or derrick use
  • Planning considerations to prevent incidents

Crane Operations

  • Safe lifting and load handling
  • Best practices for working on or near cranes and derricks

And More

  • Additional guidelines for minimizing risk and maintaining compliance
COURSE DURATION

Approximately 60 minutes

PASS MARK

A minimum score of 80% is required to pass. Learners may attempt the exam up to three times. Short quizzes throughout the course reinforce key concepts.

CERTIFICATE OF COMPLETION

Upon successful completion, learners can download and print a digital certificate acknowledging their training.

Cranes and Derricks for Construction

Get Certified Today!

Buy Now $59.99

Course Preview

$59.99

Duration

Average Completion Time

Approximately 60 minutes

Testing

Knowledge Assessment

A minimum score of 80% is required to pass. Learners may attempt the exam up to three times. Short quizzes throughout the course reinforce key concepts.

Certificate

Certificate of Completion

Upon successful completion, learners can download and print a digital certificate acknowledging their training.

Get Your Recognized Leadership for Safety Excellence Certificate Today!

Get your Weights and Dimensions Certificate in as little as 90 minutes!

Get Certified Today!

Related Courses

Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Building Your Career
Asphalt Paver (OSHA)
Back Injury Risk Factors at Home & Work
Lockout Tagout (LOTO) Online Training Course
Customer Service Basics
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Bloodborne Pathogens in Healthcare Facilities
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Building Your Leadership Skills – Part 1
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
ATV/ UTV Safety
Amphibious Excavator (CAN)
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Benzene Safety
Compressed Gas
Distracted Driving Awareness Training