(866) 416 1660
|
Contact Us

Field Research Safety

Learn about employee rights and employer obligations for jury duty, military, and family leave in this 20-minute online compliance training.

 

Field Research Safety

What is Field Research Safety?

Field research often takes place in dynamic, unpredictable environments where researchers must be prepared to assess hazards, make informed decisions, and respond to unexpected situations. This Field Research Safety Training course provides a practical introduction to the essential skills required to work safely outside controlled laboratory settings. Learners explore the responsibilities of field team members, the importance of thorough pre-departure planning, and the procedures for recognizing and managing environmental, logistical, psychological, and security risks. By developing foundational awareness and preparedness, participants gain the confidence to conduct fieldwork safely and effectively in diverse outdoor locations.

Course Overview

The Field Research Safety course introduces learners to the essential practices required to work safely in unpredictable and uncontrolled outdoor environments. Unlike laboratory work, field research presents dynamic risks such as environmental hazards, remote locations, wildlife exposure, and logistical challenges. This training provides a practical foundation for recognizing and managing these risks before and during field activities.

Learners will explore the roles and responsibilities of field researchers, supervisors, and principal investigators, including incident reporting and team communication. The course also outlines the importance of proper preparation—such as obtaining medical clearances, securing travel documentation, gathering required PPE, and completing necessary task-specific training. By building an understanding of field hazards and emergency procedures, participants will be better equipped to reduce injury risks and work confidently in diverse field settings.

TOPIC OVERVIEW

Field research often requires navigating unpredictable terrain, varying climates, equipment use, and remote working conditions. Understanding how to plan ahead, identify hazards, and respond to psychological, environmental, and security risks is essential for safe field operations. This course helps learners build the foundational awareness needed to make informed decisions during fieldwork.

COURSE TOPICS

Introduction

  • Roles and responsibilities of field researchers
  • Reporting incidents, injuries, and accidents

Preparing to Leave

  • Medical preparation and vaccinations
  • Travel documentation and planning
  • Selecting and assembling required PPE
  • Training for specialized field tasks

Hazards and Injury Prevention

  • Identifying common fieldwork hazards
  • Preventing injuries during field activities
  • Safe work practices in dynamic environments

Psychological, Security, and Other Risks in Field Research

  • Recognizing unique risks in remote or unfamiliar areas
  • Mitigating psychological, cultural, and security-related risks
  • Emergency actions and response procedures
COURSE DURATION

This online Field Research Safety training takes approximately 20 minutes to complete. Learners may pause and resume as needed.

PASS MARK

A score of 80% is required to pass the final assessment. Participants may attempt the course up to three times. Short quizzes throughout reinforce key learning outcomes.

CERTIFICATE OF COMPLETION

Upon successful completion, learners can download and print a digital certificate of completion, confirming their training in field research safety practices.

Field Research Safety

Get Certified Today!

Buy Now $69.99

Course Preview

$69.99

Duration

Average Completion Time

The average completion time is 20 minutes. Individual times will vary depending how long is spent on each module.

Testing

Knowledge Assessment

Testing is included to reinforce the training. You are allowed three attempts to achieve a passing mark of 80% or greater.

Certificate

Certificate of Completion

Upon successful completion of this course, a certificate will be safely stored on your account and is available to download & print.

Get Your Recognized Leadership for Safety Excellence Certificate Today!

Get your Weights and Dimensions Certificate in as little as 90 minutes!

Get Certified Today!

Related Courses

Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Back Safety in Office Environments
Fall Protection (OSHA)
Aerial Lifts in Construction Environments
School Bus Cargo Securement and Safety Laws Online
Fire Extinguishers: Monthly Inspections Refresher
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Bloodborne Pathogens in First Response Environments
Food Safety Training (US)
Aerial Lift Safety – MEWPs (OSHA)
Vehicle Mounted Aerial Lifts (OSHA)
Farm Safety Awareness
Environmental Awareness (Bundle)
Course Overview Operating a scraper requires skill, precision, and a strong understanding of safety protocols. Scraper Operator Safety Training (OSHA) provides the classroom portion of operator safety certification and meets OSHA’s training requirements for scraper operation. This course prepares operators to recognize hazards, understand scraper anatomy, and apply safe practices in construction and earthmoving environments. Learners will review essential stability principles, personal protective equipment (PPE) use, and hazard prevention methods to minimize the risk of injury or equipment damage. Interactive quizzes throughout reinforce key learning points and prepare participants for the final written exam. Upon completion, learners can print their certificate and wallet card, while employers can use the provided checklist to evaluate practical operating performance in the field. Topic Overview Scrapers are powerful earthmoving machines used to cut, collect, and transport large volumes of material. Without proper training, operators face risks such as rollovers, collisions, or equipment failures. This course gives workers the knowledge to identify these hazards and follow OSHA-compliant safety practices to prevent incidents on the job site. Course Topics • Introduction: Overview of scraper operation and OSHA safety requirements. • Anatomy: Identify key scraper components and their functions. • Safe Practices: Learn proper start-up, operation, and shutdown procedures. • Stability: Understand how weight distribution and terrain affect equipment balance. • Hazards: Recognize and mitigate common job site and operational risks. • Conclusion: Reinforce best practices for safe and efficient scraper operation. Course Duration This online course takes approximately 120 minutes (2 hours) to complete. Learners can pause and resume training anytime for flexibility. Pass Mark A minimum score of 80% is required to successfully complete the course. Learners may attempt the course up to three times if the pass mark is not achieved. Quizzes throughout reinforce understanding and ensure knowledge retention. Certificate of Completion Upon successful completion, a digital certificate of completion and wallet card will be available for download and printing. Employers may use the included checklist to verify hands-on competency in the field."
Become a Contributing Project Team Member – Part 2