Asbestos was used for decades in insulation, floor tile, roofing, pipe wrap, and drywall, and much of it is still in place across American buildings today. The danger is that you usually cannot see, smell, or feel the fibers that cause asbestosis, lung cancer, and mesothelioma. This online course teaches you to recognize asbestos-containing materials, understand the exposure limits that govern the work, and apply the controls that keep fibers out of the air and out of your lungs.<\/p>\n
The training is aligned with OSHA’s asbestos standards for general industry (29 CFR 1910.1001) and construction (29 CFR 1926.1101), along with EPA AHERA requirements. It answers a direct compliance need: OSHA requires employers to train employees who may be exposed at or above the permissible exposure limit, both before assignment and annually after that. This course covers that required awareness content online, so workers train on their own schedule, then pair it with the site-specific instruction their workplace provides and return to the job trained and documented.<\/p>\n
More importantly, it gives workers the single most valuable habit in asbestos safety: when in doubt, treat the material as asbestos and act accordingly.<\/p>\n
Learn the physical properties of asbestos and the common building materials where it is found, from thermal insulation and floor tile to roofing and pipe wrap. You leave able to spot likely asbestos-containing materials on a real site.<\/p>\n
Understand why asbestos is so dangerous, including asbestosis, lung cancer, and mesothelioma, and why the long latency period makes prevention today so critical. This is the section that turns compliance into personal motivation.<\/p>\n
Learn to distinguish asbestos-containing materials (ACM) from presumed asbestos-containing materials (PACM) and why both must be handled with the same caution until proven otherwise.<\/p>\n
Understand OSHA’s four classes of asbestos work and how the required precautions change with each. Workers and supervisors learn where a given task falls and what that means for controls.<\/p>\n
Get a clear explanation of the permissible exposure limit (0.1 fibers per cubic centimeter as an 8-hour time-weighted average) and the excursion limit (1.0 f\/cc over 30 minutes), plus what triggers monitoring and additional protections.<\/p>\n
Explore the engineering controls, work practices, respiratory protection, and personal protective equipment that reduce exposure, and what to do if a fiber release occurs.<\/p>\n
See how OSHA’s standards and EPA’s AHERA requirements fit together so employers understand their full obligations, not just one agency’s slice of them.<\/p>\n
After completing this course, you will be able to:<\/p>\n
This awareness-level training is designed for anyone who may encounter asbestos on the job, including:<\/p>\n
Asbestos remains one of the most serious and preventable occupational health hazards in the United States, and the cost of getting it wrong is measured in lives, not dollars. This course delivers the awareness-level training OSHA expects, in a format built for busy crews and real job sites.<\/p>\n
You get clear explanations of the limits and classifications that actually govern the work, practical guidance you can use the moment you spot a suspect material, and a certificate that documents your compliance. Employers get a workforce that recognizes risk before it becomes exposure and a training record that stands up to scrutiny. For skilled trades and general industry alike, that combination protects both health and the business.<\/p>\n
Yes. OSHA requires employers to train employees who may be exposed to asbestos at or above the permissible exposure limit or excursion limit, before assignment and at least annually after that.<\/p>\n
The permissible exposure limit is 0.1 fibers per cubic centimeter of air as an 8-hour time-weighted average, with an excursion limit of 1.0 fiber per cubic centimeter over any 30-minute period.<\/p>\n
OSHA divides asbestos work into Class I through Class IV, ranging from the removal of thermal system insulation and surfacing materials (Class I) to incidental cleanup and maintenance activities (Class IV). Each class carries its own required precautions.<\/p>\n
The main asbestos-related diseases are asbestosis, lung cancer, and mesothelioma. They often appear years or decades after exposure, which is why prevention is essential.<\/p>\n
Yes. You receive a certificate of completion documenting your awareness-level training.<\/p>","protected":false},"excerpt":{"rendered":"
Understand asbestos hazards and how to control exposure at work. Learn to identify ACM and PACM, follow OSHA exposure limits, use PPE correctly and apply essential safe work practices.<\/p>","protected":false},"featured_media":88842,"template":"","meta":{"_acf_changed":false,"om_disable_all_campaigns":false},"course_tag":[2316],"course_category":[1950],"course_filters":[1951],"course_language":[2277],"class_list":["post-88832","courses","type-courses","status-publish","has-post-thumbnail","hentry","course_tag-asbestos-hazards-and-controls-training","course_category-online-safety-courses","course_filters-safety","course_language-english"],"acf":[],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t